Hyco EVL150DR Everlast 6kw 150ltr Unvented Direct Water Heater
The Everlast Direct is a large capacity unvented water heater suitable for small flats and houses or much larger requirements such as hotels, sports centres or nursing homes.
Click here for further information.
Incoloy, immersion type.
1 x 3.0 kW 90 litres
2 x 3.0 kW > 90 litres < 400 litres
3 x 3.0 kW > 400 litres
Rod type adjustable to 65⁰C
High quality duplex stainless steel vessel
No sacrificial anode avoids the need for regular inspection.
Injected polyurethane foam
Overheat temperature protection 85⁰C (manual reset).
Cylinder Kit Contents
Cold water inlet set.
15 x 22mm tundish.
Temperature and pressure relief valve (set at 7 bar 90⁰C).
Expansion vessel and bracket 12, 18 or 24 litre depending on capacity.
Expansion relief valve set at 6 bar.
Pressure reducing valve set at 3 bar.
Ensure floor can take cylinder weight when full.
Height 1102mm Diameter 545mm
Must be installed by a suitably qualified person.
Minimum flow rate required 20 l/m.
Minimum water pressure 1.5 bar..
Maximum water pressure to pressure reducing valve 15 bar.
Working water pressure 3 bar.
All cylinder connections are 22mm compression.
Cylinder diameter excludes external pipework.
Installation must comply with current IEE regulations.
The product should be connected to the fixed wiring of the property via a suitably rated isolating switch with a contact separation of at least 3mm in all poles.
2 year warranty on all controls. 25 year tank warranty.